| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 1.20V ~ 3.60V |
| Case/Package | VQFN-16 |
| Number of Outputs | 2 Output |
| Number of Circuits | 1 Circuit |
| Number of Channels | 4 Channel |
| Number of Positions | 16 Position |
| Number of Bits | 4 Bit |
| Propagation Delay Max (tpd) | 2.40 ns |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Number of Output Channels | 1 Channel |
| Supply Voltage | 1.2V ~ 3.6V |
| Supply Voltage (Max) | 3.6 V |
| Supply Voltage (Min) | 1.2 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 85℃ (TA) |
The SN74AVC4T774RGYR is a 4-bit dual-supply Bus Transceiver with configurable voltage-level shifting and 3-state outputs. The non-inverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 to 3.6V. It is optimized to operate with VCCA/VCCB set at 1.4 to 3.6V. It is operational with VCCA/VCCB as low as 1.2V. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports in the high-impedance mode. The device transmits data from the A bus to the B bus when the B outputs are activated and from the B bus to the A bus when the A outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
● Designed for asynchronous communication between data buses
● IOFF Supports partial power-down-mode operation
● Control inputs VIH/VIL levels are referenced to VCCA voltage
● Each channel has an independent DIR control input
● Latch-up performance exceeds 100mA per JESD 78, class II
● Fully configurable dual-rail design allows port to operate over full 1.2 to 3.6V power-supply range
● I/Os are 4.6V tolerant
● Green product and no Sb/Br
TI
4Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs
TI
Transceiver, 1.2V to 3.6V, TSSOP-16
TI
TEXAS INSTRUMENTS SN74AVC4T774RGYR Transceiver, 1.2V to 3.6V, VQFN-16
TI
Bus Transceiver, AVC Family, 4Input, 50mA, 3.1ns, 1.2V to 3.6V, UQFN-16
TI
TEXAS INSTRUMENTS SN74AVC4T774PW Level Translator, AVC Family, 4Channel, 4Input, 12mA, 2.4ns, 1.2V to 3.6V, TSSOP-16
TI
4Bit Dual-Supply Bus Transceiver With Configurable Voltage-Level Shifting and 3-State Outputs 16-TSSOP -40℃ to 85℃
TI
4Bit Dual-Supply Bus Transceiver With Configurable Voltage-Level Shifting and 3-State Outputs 16-TSSOP -40℃ to 85℃
TI
4Bit DUAL-SUPPLY BUS TRANSCEIVER WITH CONFIGURABLE VOLTAGE TRANSLATION AND 3-STATE OUTPUTS
TI
Voltage Level Translator 16Pin UQFN T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
