| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 6 Pin |
| Supply Voltage (DC) | 1.20V ~ 3.60V |
| Case/Package | SC-70-6 |
| Number of Outputs | 2 Output |
| Output Current | 12 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 6 Position |
| Number of Bits | 1 Bit |
| Propagation Delay Max (tpd) | 2.80 ns |
| Voltage Nodes | 3.30 V |
| Data Rate | 380 Mbps |
| Number of Inputs | 1 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Number of Output Channels | 1 Channel |
| Supply Voltage | 1.2V ~ 3.6V |
| Supply Voltage (Max) | 3.6 V |
| Supply Voltage (Min) | 1.2 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 2.15 mm |
| Size-Width | 1.4 mm |
| Size-Height | 1 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The SN74AVCH1T45DCKT is a 1-bit dual-supply Bus Transceiver with configurable voltage translation and 3-state outputs. It uses two separate configurable power-supply rails. The A port is designed to track VCCA, which accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB, which also accepts any supply voltage from 1.2 to 3.6V. It is designed for asynchronous communication between two data buses. The device transmits data from either the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direction-control input. It is also designed so that the DIR input is referenced to VCCA. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pull-up or pull-down resistors with the bus-hold circuitry is not recommended. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device.
● Bus hold on data inputs eliminates the need for external pull-up and pull-down resistors
● VCC Isolation
● Fully configurable dual-rail design
● I/Os are 4.6V tolerant
● Ioff Supports partial-power-down mode operation
● Latch-up performance exceeds 100mA per JESD78 class II
● Green product and no Sb/Br
TI
Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs
TI
TEXAS INSTRUMENTS SN74AVCH1T45DCKR Transceiver, 1.2V to 3.6V, SC-70-6
TI
TEXAS INSTRUMENTS SN74AVCH1T45DBVR Transceiver, 1.2V to 3.6V, SOT-23-6
TI
TEXAS INSTRUMENTS SN74AVCH1T45DCKT Bus Transceiver, AVC Family, 1Input, 12mA, 2.8ns, 380Mbps, 1.2V to 3.6V, SC-70-6
TI
TEXAS INSTRUMENTS SN74AVCH1T45DBVT Bus Transceiver, AVC Family, 1Input, 1Bit, 12mA, 2.8ns, 1.2V to 3.6V, SOT-23-6
TI
TEXAS INSTRUMENTS SN74AVCH1T45YZPR Bus Transceiver, AVC Family, 1Input, 1Bit, 12mA, 2.8ns, 1.2V to 3.6V, BGA-6
TI
Voltage Level Translator 6Pin DSBGA T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
