The SN74CB3Q3305PW is a high-bandwidth FET Bus Switch uses a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device also features low data I/O capacitance to minimize capacitive loading and signal distortion on the data bus. It is specifically designed to support high-bandwidth applications. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry prevents damaging current backflow through the device when it is powered down. The device has isolation during power off. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor, the minimum value of the resistor is determined by the current-sourcing capability of the driver.
● Rail-to-rail switching on data I/O ports
● Bidirectional data flow with near-zero propagation delay
● Low input/output capacitance minimizes loading and signal distortion
● Fast switching frequency
● Data and control inputs provide undershoot clamp diodes
● Low power consumption
● Ioff Supports partial-power-down mode operation
● Latch-up performance exceeds 100mA per JESD 78, Class II
● Green product and no Sb/Br
