The SN74CB3Q3306APW is a dual FET low-voltage high-bandwidth Bus Switch utilizes a charge pump to elevate the gate voltage of the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device also features low data I/O capacitance to minimize capacitive loading and signal distortion on the data bus. Specifically designed to support high-bandwidth applications, the SN74CB3Q3306A provides an optimized interface solution ideally suited for broadband communications, networking and data-intensive computing systems. It is organized as two 1-bit switches with separate OE (1OE\, 2OE\\) inputs. It can be used as two 1-bit bus switches or as one 2-bit bus switch. When OE\ is low, the associated 1-bit bus switch is ON and the A port is connected to the B port, allowing bidirectional data flow between ports.
● High-bandwidth data path (up to 500MHz)
● 5V Tolerant I/Os with device powered up or powered down
● Low and flat ON-state resistance (ron) characteristics
● Rail-to-rail switching on data I/O ports
● Bidirectional data flow with near-zero propagation delay
● Low input/output capacitance minimizes loading and signal distortion
● Data and control inputs provide undershoot clamp diodes
● 0.25mA Typical low power consumption
● Control inputs can be driven by TTL or 5/3.3V CMOS outputs
● Ioff Supports partial-power-down mode operation
● Latch-up performance exceeds 100mA per JESD 78, Class II
● Supports both digital and analog applications
● Green product and no Sb/Br
