| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 14 Pin |
| Supply Voltage (DC) | 2.00V ~ 6.00V |
| Case/Package | TSSOP-14 |
| Number of Outputs | 4 Output |
| Number of Circuits | 4 Circuit |
| Number of Channels | 4 Channel |
| Number of Bits | 4 Bit |
| Propagation Delay Max (tpd) | 26.0 ns |
| Voltage Nodes | 6.00 V, 5.00 V, 2.00 V |
| Output Current Drive | -1.00 mA |
| Number of Inputs | 4 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 2V ~ 6V |
| Supply Voltage (Max) | 6 V |
| Supply Voltage (Min) | 2 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 5 mm |
| Size-Width | 4.4 mm |
| Size-Height | 1.15 mm |
| Operating Temperature | -40℃ ~ 85℃ |
These quadruple bus buffer gates feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low.
●To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pullup resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
TI
Quadruple Bus Buffer Gates With 3-State Outputs
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST CMOS 14Pin SOIC T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST CMOS 14Pin TSSOP T/R
TI
Buffer/Line Driver 4Channel Non-Inverting 3-ST CMOS 14Pin Plastic Dip Tube
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST CMOS 14Pin SOP T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST CMOS 14Pin SSOP T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST CMOS 14Pin SOIC Tube
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST CMOS 14Pin TSSOP T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST CMOS 14Pin SOIC T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST CMOS 14Pin TSSOP Tube
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
