The SNx4HC165 devices are 8-bit parallel-load shift registers that, when clocked, shift the data toward a serial (QH) output. Parallel-in access to each stage is provided by eight individual direct data (A–H) inputs that are enabled by a low level at the shift/load (SH/LD) input. The SNx4HC165 devices also feature a clock-inhibit (CLK INH) function and a complementary serial (QH) output.
●Clocking is accomplished by a low-to-high transition of the clock (CLK) input while SH/LD is held high and CLK INH is held low. The functions of CLK and CLK INH are interchangeable. Because a low CLK and a low-to-high transition of CLK INH also accomplish clocking, CLK INH must be changed to the high level only while CLK is high. Parallel loading is inhibited when SH/LD is held high. While SH/LD is low, the parallel inputs to the register are enabled independently of the levels of the CLK, CLK INH, or serial (SER) inputs.
● Wide Operating Voltage Range of 2 V to 6 V
● Outputs Can Drive Up to 10 LSTTL Loads
● Low Power Consumption, 80-µA Maximum ICC
● Typical tpd = 13 ns
● ±4-mA Output Drive at 5 V
● Low Input Current of 1 µA Maximum
● Complementary Outputs
● Direct Overriding Load (Data) Inputs
● Gated Clock Inputs
● Parallel-to-Serial Data Conversion
● On Products Compliant to MIL-PRF-38535,
●All Parameters Are Tested Unless Otherwise
●Noted. On All Other Products, Production
●Processing Does Not Necessarily Include Testing
●of All Parameters.
