SN74HC244PW Datasheet PDF - TI

The SN74HC244PW is an octal Buffer/Line Driver designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers and bus-oriented receivers and transmitters. The SNx4HC244 device is organized as two 4-bit buffers and drivers with separate output-enable (OE) inputs. When OE is low, the device passes non-inverted data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.

● High-current outputs drive up to 15 LSTTL loads

● 3-state Outputs drive bus lines or buffer memory address registers

● 80µA maximum ICC low power consumption

● 11ns typical Propagation delay (tpd)

● ±6mA Output drive at 5V

● 1µA maximum Low input current

● Green product and no Sb/Br