TYPE | DESCRIPTION |
---|
Case/Package | SO-14 |
The SNx4HC74 devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements are transferred to the outputs on the positive-going edge of the clock (CLK) pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of CLK. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs.
● Wide Operating Voltage Range: 2 V to 6 V
● Outputs Can Drive Up To 10 LSTTL Loads
● Low Power Consumption, 40-µA Maximum ICC
● Typical tpd = 15 ns
● ±4-mA Output Drive at 5 V
● Very Low Input Current of 1 µA
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin SC-70 T/R
TI
Buffer/Line Driver 1CH Non-Inverting 3-ST CMOS 5Pin SOT-23 T/R
TI
Shift Register, HC Family, 74HC164, Serial to Parallel, 1Element, 8Bit, DIP, 14Pins
TI
Inverter, Schmitt Trigger, 74LVC1G14, 1Input, 32mA, 1.65V to 5.5V, SOT-23-5
TI
Inverter Schmitt Trigger 6Element CMOS 14Pin TSSOP Inverter Schmitt Trigger 6Element CMOS 14Pin TSSOP
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin TSSOP T/R
TI
Inverter, Schmitt Trigger, 74AHC1G14, 1Input, 8mA, 2V to 5.5V, SOT-23-5
TI
TEXAS INSTRUMENTS SN74LVC4245APWR Transceiver, Non-Inverting, 2.7V to 3.6V, 4.5V to 5.5V, TSSOP-24
TI
OR Gate 1Element 2IN CMOS 5Pin SOT-23 T/R
TI
Flip-Flop, Differential / Complementary, Positive Edge, 74LVC74, D, 4.1ns, 200MHz, 32mA, VSSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.