SN74LS299N Datasheet PDF - TI

The SN74LS299N is an universal Shift/Storage Register features multiplexed inputs/outputs to achieve full eight-bit data handling in a single 20-pin package. Two function-select inputs and two output-control inputs can be used to choose the modes of operation listed in the function table. Synchronous parallel loading is accomplished by taking both function-select lines, S0 and S1, high. This places the three-state outputs in a high-impedance state, which permits data that is applied on the input/output lines to be clocked into the register. Reading out of the register can be accomplished while the outputs are enabled in any mode. A direct overriding input is provided to clear the register whether the outputs are enabled or off.

● Multiplexed inputs/outputs provide improved bit density

● Hold (Store) operating mode

● Shift left operating mode

● Shift right operating mode

● Load data operating mode

● Operates with outputs enabled or at high Z

● 3-state Outputs drive bus lines directly

● Can be cascaded for N-bit word lengths