| TYPE | DESCRIPTION |
|---|
| Number of Pins | 16 Pin |
| Case/Package | DIP |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Unknown |
These devices are high speed hex buffers with 3-state outputs. They are organized as single 6-bit or 2-bit/4-bit, with inverting or non-inverting data (D) paths. The outputs are designed to drive 15 TTL Unit Loads or 60 Low Power Schottky loads when the Enable (E) is LOW.
●When the Output Enable (E) is HIGH, the outputs are forced to a high impedance “off” state. If the outputs of the 3-state devices are tied together, all but one device must be in the high impedance state to avoid high currents that would exceed the maximum ratings. Designers should ensure that Output Enable signals to 3-state devices whose outputs are tied together are designed so there is no overlap.
ON Semiconductor
4 Pages / 0.08 MByte
ON Semiconductor
4 Pages / 0.12 MByte
TI
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin SOP T/R
TI
TEXAS INSTRUMENTS SN74LS367AN Buffer / Line Driver, Non-Inverting, Hex Bus Driver , 3-State, 4.75V to 5.25V, DIP-16
TI
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin SOIC T/R
TI
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin SOIC Tube
TI
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin PDIP Tube
ON Semiconductor
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin PDIP Box
Motorola
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin SOIC T/R
TI
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin SOP
TI
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin SOP T/R
TI
Buffer/Line Driver 6CH Non-Inverting 3-ST Bipolar 16Pin PDIP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
