SN74LVC1G125DBVT Datasheet PDF - TI

The SN74LVC1G125DBVT is a single Bus Buffer Gate with 3-state outputs. The output is disabled when the output-enable (OE) input is high. The CMOS device has high output drive while maintaining low static power dissipation over a broad VCC operating range. The device contains one buffer gate device with output enable control and performs the Boolean function Y = A. This device is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.

● Provides down translation to VCC

● IOFF Supports live insertion, partial-power-down mode and back-drive protection

● Latch-up performance exceeds 100mA per JESD 78, class II

● Inputs accept voltages to 5.5V

● 3.7ns at 3.3V Propagation delay (tpd)

● 10µA ICC Low power consumption

● ±24mA Output drive at 3.3V

● Green product and no Sb/Br