| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 6 Pin |
| Supply Voltage (DC) | 1.65V ~ 5.50V |
| Case/Package | SC-70-6 |
| Number of Outputs | 1 Output |
| Output Current | 50 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 6 Position |
| Number of Bits | 1 Bit |
| Propagation Delay Max (tpd) | 6.90 ns |
| Voltage Nodes | 1.80 V, 2.50 V, 3.30 V, 5.00 V |
| Number of Inputs | 1 Input |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -55 ℃ |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 1.65 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -55℃ ~ 125℃ (TA) |
The SN74LVC1T45MDCKREP is an enhanced single-bit dual-supply Bus/Configurable Voltage Transceiver with 3-state outputs. This non-inverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 to 5.5V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.8/2.5/3.3/5V voltage nodes. It is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
● VCC Isolation - If either VCC input Is at GND, both ports are in the high-impedance state
● DIR Input circuit referenced to VCCA
● IOFF Supports partial-power-down mode operation
● Controlled baseline
● One assembly/test site
● One fabrication site
● Extended life cycle
● Latch-up performance exceeds 100mA per JESD 78, class II
● 4µA ICC Low power consumption
● ±24mA Output drive at 3.3V
● Green product and no Sb/Br
TI
TEXAS INSTRUMENTS SN74LVC1T45DBVR Transceiver, 74LVC1T245, 1.65V to 5.5V, SOT-23-6
TI
Transceiver, 74LVC1T245, 1.65V to 5.5V, SC-70-6
TI
TEXAS INSTRUMENTS SN74LVC1T45DBVT Transceiver, 74LVC1T245, 1.65V to 5.5V, SOT-23-6
TI
Transceiver, 74LVC1T245, 1.65V to 5.5V, SC-70-6
TI
Transceiver, 74LVC1T245, 1.65V to 5.5V, SOT-533-6
TI
TEXAS INSTRUMENTS SN74LVC1T45QDCKRQ1 Transceiver, 74LVC1G145, 1.65V to 5.5V, SC-70-6
TI
TEXAS INSTRUMENTS SN74LVC1T45MDCKREP Transceiver, 74LVC1T245, 1.65V to 5.5V, SC-70-6
TI
TEXAS INSTRUMENTS SN74LVC1T45YZPR Transceiver, 74LVC1T245, 5.5V to 1.65V, DSBGA-6
TI
TEXAS INSTRUMENTS SN74LVC1T45DBVRG4 Transceiver, 74LVC1T245, 1.65V to 5.5V, SOT-23-6
TI
Single-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs 6-USON -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
