SN74LVC574APWR Datasheet PDF - TI

description/ordering information

●The SN54LVC574A octal edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVC574A octal edge-triggered D-type flip-flop is designed for 1.65-V to 3.6-V VCC operation. These devices feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

●Operate From 1.65 V to 3.6 V

●Inputs Accept Voltages to 5.5 V

●Specified From −40°C to 85°C,−40°C to 125°C, and −55°C to 125°C

●Max tpd of 7 ns at 3.3 V

●Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C

●Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C

●Support Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC)

●Ioff Supports Partial-Power-Down Mode Operation

●Latch-Up Performance Exceeds 250 mA Per JESD 17

●ESD Protection Exceeds JESD 22

●    − 2000-V Human-Body Model (A114-A)

●    − 200-V Machine Model (A115-A)

●    − 1000-V Charged-Device Model (C101)