| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 24 Pin |
| Supply Voltage (DC) | 2.00V ~ 3.60V |
| Case/Package | TSSOP-24 |
| Number of Outputs | 10 Output |
| Output Current | 24 mA |
| Number of Circuits | 10 Circuit |
| Number of Channels | 10 Channel |
| Number of Positions | 24 Position |
| Number of Bits | 10 Bit |
| Voltage Nodes | 3.30 V, 2.70 V, 2.50 V, 1.80 V |
| Output Current Drive | -1.00 mA |
| Number of Inputs | 10 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 1.65V ~ 3.6V |
| Supply Voltage (Max) | 3.6 V |
| Supply Voltage (Min) | 1.65 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Size-Width | 4.4 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The SN74LVC841APW is a 10-bit bus-interface D Latch with 3-state outputs. It is designed for 1.65 to 3.6V VCC operation. The SN74LVC841A is designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The ten latches are transparent D-type latches. The device has non-inverting data (D) inputs and provides true data at its outputs. A buffered OE\ input can be used to place the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components.
● Ioff Supports partial-power-down mode operation
● Supports mixed-mode signal operation on all ports
● Latch-up performance exceeds 250mA per JESD 17
● Green product and no Sb/Br
TI
10Bit Bus-Interface D-Type Latch With 3-State Outputs 24-TSSOP -40℃ to 85℃
TI
10Bit Bus-Interface D-Type Latch With 3-State Outputs 24-SOIC -40℃ to 85℃
TI
Latch Transparent 3-ST 10CH D-Type 24Pin TSSOP Tube
TI
10Bit Bus-Interface D-Type Latch With 3-State Outputs 24-SSOP -40℃ to 85℃
TI
10Bit Bus-Interface D-Type Latch With 3-State Outputs 24-TSSOP -40℃ to 85℃
TI
10Bit Bus-Interface D-Type Latch With 3-State Outputs 24-TSSOP -40℃ to 85℃
TI
10Bit Bus-Interface D-Type Latch With 3-State Outputs 24-TVSOP -40℃ to 85℃
TI
This 10Bit bus-interface D-type latch is designed for 1.65V to 3.6V VCC operation. The SN74LVC841A is designed spe...
TI
This 10Bit bus-interface D-type latch is designed for 1.65V to 3.6V VCC operation. The SN74LVC841A is designed spe...
TI
10Bit Bus-Interface D-Type Latch With 3-State Outputs 24-TSSOP -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
