| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 24 Pin |
| Supply Voltage (DC) | 1.65V ~ 5.50V |
| Case/Package | VQFN-24 |
| Number of Outputs | 8 Output |
| Output Current | 32 mA |
| Supply Current | 15.0 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 8 Channel |
| Number of Positions | 24 Position |
| Number of Bits | 8 Bit |
| Propagation Delay Max (tpd) | 4.20 ns |
| Voltage Nodes | 5.00 V, 3.30 V, 2.50 V, 1.80 V |
| Output Current Drive | -1.00 mA |
| Number of Inputs | 8 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Number of Output Channels | 8 Channel |
| Supply Voltage | 1.65V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 1.65 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 5.65 mm |
| Size-Width | 3.65 mm |
| Size-Height | 0.95 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The SN74LVC8T245RHLR is a non-inverting 8-bit dual-supply Bus Transceiver with configurable voltage-level shifting and three-state outputs. The SN74LVC8T245 is optimized to operate with VCCA and VCCB set. The A-port is designed to track VCCA. The B-port is designed to track VCCB. The SN74LVC8T245 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A to B-bus when the B-port outputs are activated and from the B to A-bus when the A-port outputs are activated. The input circuitry on both A and B-ports is always active and must have a logic high or low level applied to prevent excess ICC and ICCZ. The SN74LVC8T245 is designed so that the control pins (DIR and OE) are supplied by VCCA.
● Control inputs VIH/VIL levels are referenced to VCCA voltage
● If either VCC input is at GND, it is in the high-impedance state
● Latch-up performance exceeds 100mA per JESD 78
● ESD protection exceeds JESD 22
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
TI
Transceiver, 74LVC8T245, 1.65V to 5.5V, TSSOP-24
TI
Transceiver, 74LVC8T245, 1.65V to 5.5V, TVSOP-24
TI
TEXAS INSTRUMENTS SN74LVC8T245DBQR Transceiver, 74LVC8T245, 1.65V to 5.5V, SSOP-24
TI
8Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and Three-State Outputs 24-VQFN -40℃ to 85℃
TI
IC: digital; 8Bit, bus transceiver; Channels:8; SMD; TSSOP24
TI
Transceiver, 74LVC8T245, 1.65V to 5.5V, SSOP-24
TI
IC: digital; 8Bit, bus transceiver; SMD; TSSOP24; Series:74LVC
TI
Bus Transceiver, LVC Family, 8Input, 50mA, 4.3ns, 1.65V to 5.5V, SOIC-24
TI
Bus XCVR Single 8CH 3-ST 24Pin TSSOP T/R
TI
Bus Transceiver, LVC Family, 8Input, 8Bit, 32mA, 4.3ns, 1.65V to 5.5V, TSSOP-24
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
