● 150 MHz e200z4 Power Architecture core
● Variable length instruction encoding (VLE)
● Superscalar architecture with 2 execution units
● Up to 2 integer or floating point instructions per cycle
● Up to 4 multiply and accumulate operations per cycle
● Memory organization
● 4 MB on-chip flash memory with ECC and Read While Write (RWW)
● 192 KB on-chip RAM with standby functionality (32 KB) and ECC
● 8 KB instruction cache (with line locking), configurable as 2- or 4-way
● 14 + 3 KB eTPU code and data RAM
● 5 × 4 crossbar switch (XBAR)
● 24-entry MMU
● External Bus Interface (EBI) with slave and master port
● Fail Safe Protection
● 16-entry Memory Protection Unit (MPU)
● CRC unit with 3 sub-modules
● Junction temperature sensor
● Interrupts
● Configurable interrupt controller (with NMI)
● 64-channel DMA
● Serial channels
● 3 × eSCI
● 3 × DSPI (2 of which support downstream Micro Second Channel [MSC])
● 3 × FlexCAN with 64 messages each
● 1 × FlexRay module (V2.1) up to 10 Mbit/s with dual or single channel and 128 message objects and ECC
● 1 × eMIOS
● 24 unified channels
● 1 × eTPU2 (second generation eTPU)
● 32 standard channels
● 1 × reaction module (6 channels with three outputs per channel)
● 2 enhanced queued analog-to-digital converters (eQADCs)
● Forty 12-bit input channels (multiplexed on 2 ADCs); expandable to 56 channels with external multiplexers
● 6 command queues
● Trigger and DMA support
● 688 ns minimum conversion time
● On-chip CAN/SCI/FlexRay Bootstrap loader with Boot Assist Module (BAM)
● Nexus: Class 3+ for core; Class 1 for the eTPU
● JTAG (5-pin)
● Development Trigger Semaphore (DTS)
● Clock generation
● On-chip 4–40 MHz main oscillator
● On-chip FMPLL (frequency-modulated phase-locked loop)
● Up to 120 general purpose I/O lines
● Individually programmable as input, output or special function
● Programmable threshold (hysteresis)
● Power reduction mode: slow, stop and stand-by modes
● Flexible supply scheme
● 5 V single supply with external ballast
● Multiple external supply: 5 V, 3.3 V and 1.2 V
● Designed for LQFP176, LBGA208, PBGA324 and Known Good Die (KGD)