The high density value line STM8L05xxx devices are members of the STM8L ultra low power 8-bit family.
●The value line STM8L05xxx ultra low power family features the enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations.
●The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive In-application debugging and ultra-fast Flash programming.
●High density value line STM8L05xxx microcontrollers feature embedded data EEPROM and low-power, low-voltage, single-supply program Flash memory.
●All devices offer 12-bit ADC, real-time clock, four 16-bit timers, one 8-bit timer as well as standard communication interface such as two SPIs, I2C, three USARTs and 8x24 or 4x28-segment LCD. The 8x24 or 4x 28-segment LCD is available on the high density value line STM8L05xxx.
●The STM8L05xxx family operates from 1.8 V to 3.6 V and is available in the -40 to +85 °C temperature range.
●The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.
●All value line STM8L ultra low power products are based on the same architecture with the same memory mapping and a coherent pinout.
●Key Features
● Operating conditions
● Operating power supply: 1.8 V to 3.6 V
● Temperature range: -40 °C to 85 °C
● Low power features
● 5 low power modes: Wait, Low power run (5.9 µA), Low power wait (3 µA), Active-halt with full RTC (1.4 µA), Halt (400 nA)
● Dynamic power consumption: 200 µA/MHz + 330 µA
● Ultra-low leakage per I/0: 50 nA
● Fast wakeup from Halt: 4.7 µs
● Advanced STM8 core
● Harvard architecture and 3-stage pipeline
● Max freq. 16 MHz, 16 CISC MIPS peak
● Up to 40 external interrupt sources
● Reset and supply management
● Low power, ultra-safe BOR reset with 5 programmable thresholds
● Ultra low power POR/PDR
● Programmable voltage detector (PVD)
● Clock management
● 32 kHz and 1 to 16 MHz crystal oscillators
● Internal 16 MHz factory-trimmed RC
● 38 kHz low consumption RC
● Clock security system
● Low power RTC
● BCD calendar with alarm interrupt
● Digital calibration with +/- 0.5ppm accuracy
● Advanced anti-tamper detection
● LCD: 8x24 or 4x28 w/ step-up converter
● Memories
● 64 KB Flash program memory and 256 bytes data EEPROM with ECC, RWW
● Flexible write and read protection modes
● 4 KB of RAM
● DMA
● 4 channels supporting ADC, SPIs, I2C, USARTs, timers
● 1 channel for memory-to-memory
● 12-bit ADC up to 1 Msps/27 channels
● Internal reference voltage
● Timers
● Three 16-bit timers with 2 channels (used as IC, OC, PWM), quadrature encoder
● One 16-bit advanced control timer with 3 channels, supporting motor control
● One 8-bit timer with 7-bit prescaler
● 2 watchdogs: 1 Window, 1 Independent
● Beeper timer with 1, 2 or 4 kHz frequencies
● Communication interfaces
● Two synchronous serial interfaces (SPI)
● Fast I2C 400 kHz SMBus and PMBus
● Three USARTs (ISO 7816 interface + IrDA)
● Up to 54 I/Os, all mappable on interrupt vectors
● Development support
● Fast on-chip programming and non- intrusive debugging with SWIM
● Bootloader using USART
