General description
●The TDA8566 is an integrated class-B output amplifier which is available in several packages. TDA8566TH is contained in a 20-lead small outline plastic package. The TDA8566TH1 is a 24-lead small outline plastic package which is pin compatible with the I2C-bus controlled amplifier TDA1566TH for one board layout. TDA8566Q is a 17-pin DIL-bent-SIL package.
●The device contains 2 amplifiers in a Bridge-Tied Load (BTL) configuration. The output power is 2×25 W in a 4Ωload or 2 ×40 W in a 2Ωload. It has a differential input stage and 2 diagnostic outputs. The device is primarily developed for car radio applications.
●Features
●Differential inputs
●Very high Common Mode Rejection Ratio (CMRR)
●High common mode input signal handling
●Requires very few external components
●High output power
●4Ωand 2Ωload driving capability
●Low offset voltage at output
●Fixed gain
●Diagnostic facility (distortion, short-circuit and temperature pre-warning)
●Good ripple rejection
●Mode select switch (operating, mute and standby)
●Load dump protection
●Short-circuit proof to ground, to VPand across the load
●Low power dissipation in any short-circuit condition
●Thermally protected
●Reverse polarity safe
●Protected against electrostatic discharge
●No switch-on/switch-off plops
●Low thermal resistance
●TDA8566TH1 is pin compatible with TDA1566TH