| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Case/Package | MSOP-8 |
| Output Current | ≤100 mA |
| Supply Current | 1.14 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Common Mode Rejection Ratio | 80 dB |
| Input Offset Drift | 2.00 µV/K |
| Bandwidth | 145 MHz |
| Slew Rate | 490 V/μs |
| Gain Bandwidth Product | 95 MHz |
| Input Offset Voltage | 2 mV |
| Input Bias Current | 700 nA |
| Available Channels | D, Q |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| 3dB Bandwidth | 145 MHz |
| Gain Bandwidth | 95 MHz |
| Minimum CMRR Range | 80 dB |
| Supply Voltage | 2.5V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 2.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 3 mm |
| Size-Width | 3 mm |
| Size-Height | 0.95 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The THS4521IDGKT is a very low power rail-to-rail output fully Differential Amplifier with an input common-mode range that includes the negative rail. This amplifier is designed for low-power data acquisition systems and high-density applications where power dissipation is a critical parameter and provide exceptional performance in audio applications. This fully differential amplifier feature accurate output common-mode control that allows for dc-coupling when driving analogue-to-digital converters (ADCs). This control, coupled with an input common-mode range below the negative rail as well as rail-to-rail output, allows for easy interfacing between single-ended, ground-referenced signal sources. Additionally, this device is ideally suited for driving both successive-approximation register (SAR) and delta-sigma (ΔΣ) ADCs using only a single +2.5 to +5V and ground power supply.
● Fully differential architecture
● 119dB Open-loop gain
● Output common-mode control
● 20µA Power-down capability
● Green product and no Sb/Br
●This IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
TI
Very low power rail-to-rail output fully differential amplifier
TI
TEXAS INSTRUMENTS THS4521IDGKR Differential Amplifier, 1 Amplifiers, 2mV, 100dB, 145MHz, -40℃, 85℃
TI
Very low power rail-to-rail output fully differential amplifier 8-SOIC -40℃ to 85℃
TI
Differential Amplifier, Low Power, 1 Amplifiers, 2mV, 1.02dB, 95MHz, -40℃, 85℃
TI
TEXAS INSTRUMENTS THS4521ID Differential Amplifier, Low Power, 1 Amplifiers, 2mV, 1.02dB, 95MHz, -40℃, 85℃
TI
OP Amp Single GP R-R O/P ±1.8V/3.6V 8Pin SOIC Tube
TI
Amplifier IC Development Tools THS4521EVM Eval Mod
TI
OP Amp Single GP R-R O/P ±1.8V/3.6V 8Pin CFPAK Bulk
TI
IC OPAMP DIFF 81MHz RRO 0XCEPT
TI
OP Amp Single GP R-R O/P ±1.8V/3.6V 8Pin CFPAK Tube
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
