THS8083A Datasheet PDF - TI

The THS8083A is a complete solution for digitizing video and graphic signals in RGB or YUV/YCbCr color spaces. The device supports pixel rates up to 80 MHz. Therefore, it can be used for PC graphics digitizing up to the VESA standard of XGA (1024 X 768) resolution at 75 Hz screen refresh rate, and in video environments for the digitizing of digital TV formats, including HDTV.

●The THS8083A is powered from a single 3.3-V supply and integrates a triple high-performance A/D converter with clamping functions and variable gain, independently programmable for each channel. The clamp timing window is provided by an external pulse or can be generated internally. The programmable gain amplifiers consist of coarse and fine gain control blocks. The THS8083A includes slicing circuitry on the Y or G input to support sync-on-green or sync-on-luminance extraction.

●The THS8083A also contains a completely digital PLL block consisting of phase-frequency detector (PFD), discrete time oscillator (DTO), and programmable divider to generate the (sampling) clock from the incoming horizontal sync (HS) signal, depending on the incoming video resolution. Any pixel rate can be generated in the 13–80 MHz range. Moreover, the output phase of the synthesized clock can be controlled with subpixel accuracy (31 uniform settings).

●Programmable time constants allow changing the PLL loop bandwidth by the integrated PLL loop filter. Alternatively, the user may bypass the PLL when an external pixel clock is available. Even then the DTO synthesized clock is still available externally and can therefore be used in other parts of the (graphics) system. Extensive PLL and input monitoring functions are integrated for typical functionality required in LCD/DMD monitor/projection systems (input format detection, autocalibration).

●All programming of the part is done via an industry-standard normal/fast I2C interface, which supports both reading and writing of register settings. The THS8083A is available in a space-saving TQFP 100-pin PowerPAD™ package.

● Analog Channels – Three digitizing channels, each with independently controllable clamp, PGA, and ADC

● Clamp: 256-step programmable RGB or YUV clamping during external or internal clamp timing window

● PGA: 6-bit coarse/5-bit fine programmable gain amplifier

● ADC: 8 bit 80 MSPS A/D converter

● Composite sync: Integrated sync-on-green/sync-on-luminance extraction from green/luminance channel or from dedicated input

● Support for dc and ac-coupled input signals

● PLL

● Fully integrated digital PLL (including loop filter) for pixel clock generation

● 13-80 MHz pixel clock generation from reference input

● Adjustable PLL loop bandwidth for minimum jitter or fast acquisition/wide capture range modes

● 5-bit programmable subpixel accurate positioning of sampling phase

● Noise gates on HS and VS inputs to avoid false PLL updating

● Output Formatter

● Single and double pixel width output data bus for reduced board clock frequency and EMI

● Support for 4:4:4 and 4:2:2 (ITU–R BT.601 style) output modes to reduce board traces

● Dedicated DATACLK output for easy latching of output data

● System

● Industry-standard normal/fast I2C interface with register readback capability

● Support for input format detection via integrated monitoring of HS, VS, and pixel clock frequencies

● Support for multidevice operation (master/slave operation for SXGA resolution)

● Space-saving TQFP-100 pin package

● Thermally-enhanced PowerPAD package for better heat dissipation

● Applications

● LCD desktop monitors and LCD or DMD-based projection systems

● Videoconferencing

● PCTV set-top boxes, digital TV sets, and multimedia cards

● Scan rate/image resolution converters

● Video/graphics digitizing equipment (RGB or YUV-based)

●PowerPAD is a trademark of Texas Instruments.