The TJA1043T,112 is a high-speed CAN transceiver IC provides an interface between a controller area network (CAN) protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to (a microcontroller with) a CAN protocol controller.
● Fully ISO 11898-2:2003 and ISO 11898-5:2007 Compliant
● Loop delay symmetry timing enables communication at data rates up to 2Mbps in the CAN FD fast phase
● Suitable for 12 and 24V Systems
● Low Electromagnetic Emission (EME) and High Electromagnetic Immunity (EMI)
● VIO Input Allows for Direct Interfacing with 3 and 5V Microcontrollers
● SPLIT Voltage Output for Stabilizing Recessive Bus Level
● Listen-only Mode for Node Diagnosis and Failure Containment
● AEC-Q100 Qualified
● Very Low Current Standby and Sleep Modes, with Local and Remote Wake-up
● Capability to Power Down Entire Node While Supporting Local, Remote and Host Wake-up
● Wake-up Source Recognition
● Transceiver Disengages from Bus (Zero Load) when VBAT Absent
● Functional Behaviour Predictable Under All Supply Conditions
● High ESD Handling Capability on Bus Pins
● Bus Pins and VBAT Protected Against Transients in Automotive Environments
● Transmit Data (TXD) Dominant Time-out Function with Diagnosis
● TXD-to-RXD Short-circuit Handler with Diagnosis
● Thermal Protection with Diagnosis
● Under-voltage Detection and Recovery on Pins VCC, VIO and VBAT
● Bus line Short-circuit Diagnosis
