| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 5.00 V |
| Case/Package | PDIP-8 |
| Output Current | ≤50 mA |
| Supply Current | 1.1 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Power Dissipation | 1000 mW |
| Common Mode Rejection Ratio | 90dB ~ 110dB |
| Input Offset Drift | 500 nV/K |
| Bandwidth | 1.9 MHz |
| Slew Rate | 2.50 V/μs |
| Gain Bandwidth Product | 1.9 MHz |
| Input Offset Voltage | 100 µV |
| Input Bias Current | 1 pA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Gain Bandwidth | 1.9 MHz |
| Power Dissipation (Max) | 1000 mW |
| Minimum CMRR Range | 90 dB |
| Supply Voltage (Max) | 16 V |
| Supply Voltage (Min) | 4.6 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 10.16 mm |
| Size-Width | 6.6 mm |
| Size-Height | 4.57 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The TLC2201IP is a low noise precision Operational Amplifier with rail-to-rail output. The operational amplifier using Texas Instruments Advanced LinCMOS™ process. This device combines the noise performance of the lowest-noise JFET amplifier with the DC precision available previously only in bipolar amplifier. The advanced LinCMOS™ process uses silicon-gate technology to obtain input offset voltage stability with temperature and time that far exceeds that obtainable using metal-gate technology. In addition, this technology makes possible input impedance levels that meet or exceed levels offered by top-gate JFET and expensive dielectric-isolated devices. The combination of excellent DC and noise performance with a common-mode input voltage range that includes the negative rail makes this device an ideal choice for high-impedance, low-level signal-conditioning applications in either single-supply or split-supply configurations.
● Common-mode input voltage range includes the negative rail
● Fully specified for both single-supply and split-supply operation
● 500µV Maximum low input offset voltage
● 0.5µV/°C Typical excellent offset voltage stability with temperature
● 1pA at TA=25°C Typical low input bias current
TI
Advanced LinCMOS™ LOW-NOISE PRECISION OPERATIONAL AMPLIFIERS
TI
TEXAS INSTRUMENTS TLC2201ACDR Operational Amplifier, Single, 1 Amplifier, 1.9MHz, 2.7V/µs, ± 2.3V to ± 8V, SOIC, 8Pins
TI
Operational Amplifier, Single, 1 Amplifier, 1.9MHz, 2.7V/µs, ± 2.3V to ± 8V, SOIC, 8Pins
TI
Operational Amplifier, Single, 1 Amplifier, 1.9MHz, 2.7V/µs, ± 2.3V to ± 8V, SOIC, 8Pins
TI
Operational Amplifier, Single, 1 Amplifier, 1.9MHz, 2.7V/µs, ± 2.3V to ± 8V, SOIC, 8Pins
TI
TEXAS INSTRUMENTS TLC2201AID Operational Amplifier, Single, 1 Amplifier, 1.9MHz, 2.7V/µs, ± 2.3V to ± 8V, SOIC, 8Pins
TI
TEXAS INSTRUMENTS TLC2201CP Operational Amplifier, Single, 1 Amplifier, 1.8MHz, 2.7V/µs, ± 2.3V to ± 8V, DIP, 8Pins
TI
TEXAS INSTRUMENTS TLC2201IP Operational Amplifier, Single, 1 Amplifier, 1.9MHz, 2.7V/µs, ± 2.3V to ± 8V, DIP, 8Pins
TI
TEXAS INSTRUMENTS TLC2201ID Operational Amplifier, Single, 1 Amplifier, 1.9MHz, 2.7V/µs, ± 2.3V to ± 8V, SOIC, 8Pins
TI
Op Amp Single GP R-R O/P ±8V/16V 8Pin SOIC T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
