This device is fabricated using LinCMOS technology and consists of two independent voltage comparators, each designed to operate from a single power supply. Operation from dual supplies is also possible if the difference between the two supplies is 2 V to 18 V. Each device features extremely high input impedance (typically greater than 1012Ω), allowing direct interfacing with high-impedance sources. The outputs are n-channel open-drain configurations and can be connected to achieve positive-logic wired-AND relationships.
●The TLC372 has internal electrostatic discharge (ESD) protection circuits and has been classified with a 1000-V ESD rating using human body model testing. However, care should be exercised in handling this device as exposure to ESD may result in a degradation of the device parametric performance.
●The TLC372C is characterized for operation from 0°C to 70°C. The TLC372I is characterized for operation from 40°C to 85°C. The TLC372M is characterized for operation over the full military temperature range of 55°C to 125°C. The TLC372Q is characterized for operation from 40°C to 125°C.
● Single or Dual-Supply Operation
● Wide Range of Supply Voltages 2 V to 18 V
● Low Supply Current Drain 150 µA Typ at 5 V
● Fast Response Time . . . 200 ns Typ for TTL-Level Input Step
● Built-in ESD Protection
● High Input Impedance . . . 1012 Ω Typ
● Extremely Low Input Bias Current 5 pA Typ
● Ultrastable Low Input Offset Voltage
● Input Offset Voltage Change at Worst-Case Input Conditions Typically 0.23 µV/Month, Including the First 30 Days
● Common-Mode Input Voltage Range Includes Ground
● Output Compatible With TTL, MOS, and CMOS
● Pin-Compatible With LM393
●LinCMOS is a trademark of Texas Instruments Incorporated.
●All other trademarks are the property of their respective owners.