| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 24 Pin |
| Supply Voltage (DC) | 2.00 V |
| Case/Package | SOIC-24 |
| Supply Current | 18 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 24 Position |
| Number of Bits | 8 Bit |
| Sample Rate | 20 Msps |
| Power Consumption | 150 mW |
| Number of ADCs | 1 ADC |
| Number of Inputs | 1 Input |
| Operating Temperature (Max) | 75 ℃ |
| Operating Temperature (Min) | -20 ℃ |
| Number of Input Channels | 1 Channel |
| Supply Voltage | 4.75V ~ 5.25V |
| Supply Voltage (Max) | 5.25 V |
| Supply Voltage (Min) | 4.75 V |
| Input Voltage | 4 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 15 mm |
| Size-Width | 5.3 mm |
| Size-Height | 1.95 mm |
| Operating Temperature | -20℃ ~ 75℃ |
The TLC5510 and TLC5510A are CMOS, 8-bit, 20 MSPS analog-to-digital converters (ADCs) that utilize a semiflash architecture. The TLC5510 and TLC5510A operate with a single 5-V supply and typically consume only 130 mW of power. Included is an internal sample-and-hold circuit, parallel outputs with high-impedance mode, and internal reference resistors.
●The semiflash architecture reduces power consumption and die size compared to flash converters. By implementing the conversion in a 2-step process, the number of comparators is significantly reduced. The latency of the data output valid is 2.5 clocks.
●The TLC5510 uses the three internal reference resistors to create a standard, 2-V, full-scale conversion range using VDDA. Only external jumpers are required to implement this option and eliminates the need for external reference resistors. The TLC5510A uses only the center internal resistor section with an externally applied 4-V reference such that a 4-V input signal can be used. Differential linearity is 0.5 LSB at 25°C and a maximum of 0.75 LSB over the full operating temperature range. Typical dynamic specifications include a differential gain of 1% and differential phase of 0.7 degrees.
●The TLC5510 and TLC5510A are characterized for operation from -20°C to 75°C.
TI
the tlc5510 and tlc5510a are cmos 8Bit 20MSPS analog-to-digital converters (adcs) that utilize a semiflash architec...
TI
Analog to Digital Converters - ADC 8Bit 20MSPS 1CH 5V
TI
Single ADC Semiflash 20MSPS 8Bit Parallel 24Pin TSSOP Tube
TI
Analog to Digital Converters - ADC 8Bit 20MSPS 1CH Internal S&H; Lo Pwr
TI
Analog to Digital Converters - ADC 8Bit 20MSPS 1CH 5V
TI
Single ADC Semiflash 20MSPS 8Bit Parallel 24Pin SOP
TI
Single ADC Semiflash 20MSPS 8Bit Parallel 24Pin SOP T/R
TI
Single ADC Semiflash 20MSPS 8Bit Parallel 24Pin SOP
TI
Single Channel Single ADC Semiflash 20MSPS 8Bit Parallel 24Pin SOP T/R
TI
Single ADC Semiflash 20MSPS 8Bit Parallel 24Pin SOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
