The TLC59116FIRHBR is an I²C bus controlled 16-channel LED Driver that is optimized for red/green/blue/amber (RGBA) colour mixing and backlight applications. Each LED output has its own 8-bit resolution (256 steps) fixed-frequency individual PWM controller that operates at 97kHz with a duty cycle that is adjustable from 0% to 99.6% to allow the LED to be set to a specific brightness value. An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190Hz and an adjustable frequency between 24Hz to once every 10.73 seconds, with a duty cycle that is adjustable from 0% to 99.6%. The group PWM controller dims or blinks all LEDs with the same value. Four software-programmable I²C bus addresses (one LED group call address and three LED sub-call addresses) allow groups of devices to be addressed simultaneously in any combination.
● 16 LED drivers
● 16 Open-drain output channels
● Software reset feature (SWRST Call) allows device to be reset through I²C bus
● 25MHz Internal oscillator requires no external components
● Internal power-on reset
● Noise filter on SCL/SDA inputs
● No glitch on power up
● Active-low reset
● Supports hot insertion
● Low standby current
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
