The TLC5941-Q1 device is a 16-channel, constant-current sink, LED driver. Each channel has an individually adjustable 4096-step grayscale PWM brightness control and a 64-step constant-current sink (dot correction), which both are accessible via a serial interface. This device features two fault diagnostic circuits. The LED open detection (LOD) indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an over temperature condition.
●The TLC5941-Q1 features two error information circuits. The LED open detection (LOD) indicates a broken or disconnected LED at an output terminal. The thermal error flag (TEF) indicates an overtemperature condition.
● Qualified for Automotive Applications
● AEC-Q100 Qualified With the Following Results:
● Device Temperature Grade 1: 40°C to 125°C
●Ambient Operating Temperature Range
● Device HBM ESD Classification Level 2
● Device CDM ESD Classification Level C4B
● 16 Channels
● 12-Bit (4096 Steps) Grayscale PWM Control
● Dot Correction: 6 Bit (64 Steps)
● Drive Capability (Constant-Current Sink):
●0 mA to 60 mA
● LED Power Supply Voltage up to 17 V
● VCC = 3.0 V to 5.5 V
● Serial Data Interface
● Controlled In-Rush Current
● 30-MHz Data Transfer Rate
● CMOS Level I/O
● Error Information
● LOD: LED Open Detection
● TEF: Thermal Error Flag