| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 5 Pin |
| Case/Package | SOT-23-5 |
| Output Current | ≤50 mA |
| Supply Current | 13 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Power Dissipation | 150 mW |
| Common Mode Rejection Ratio | 70dB ~ 83dB |
| Input Offset Drift | 500 nV/K |
| Bandwidth | 65 kHz |
| Slew Rate | 25.0 mV/μs |
| Gain Bandwidth Product | 65 kHz |
| Input Offset Voltage | 450 µV |
| Input Bias Current | 1 pA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Gain Bandwidth | 0.065 MHz |
| Power Dissipation (Max) | 150 mW |
| Minimum CMRR Range | 70 dB |
| Supply Voltage | 2.7V ~ 10V |
| Supply Voltage (Max) | 10 V |
| Supply Voltage (Min) | 2.7 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 2.9 mm |
| Size-Width | 1.6 mm |
| Size-Height | 1.15 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The TLV2711 is a single low-voltage operational amplifier available in the SOT-23 package. It consumes only 11 uA (typ) of supply current and is ideal for battery-power applications. Looking at Figure 1, the TLV2711 has a 3-V noise level of 21nV/Hz\ at 1 kHz; five times lower than competitive SOT-23 micropower solutions. The device exhibits rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV2711 is fully characterized at 3 V and 5 V and is optimized for low-voltage applications.
●The TLV2711, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs).
●With a total area of 5.6mm2, the SOT-23 package only requires one-third the board space of the standard 8-pin SOIC package. This ultra-small package allows designers to place single amplifiers very close to the signal source, minimizing noise pick-up from long PCB traces. View datasheet View product folder
TI
the tlv2711 is a single low-voltage operational amplifier available in the sot-23 package. it consumes only 11uA (ty...
TI
TEXAS INSTRUMENTS TLV2711CDBVR Operational Amplifier, Single, 1 Amplifier, 65kHz, 0.025V/µs, 2.7V to 10V, SOT-23, 5Pins
TI
TEXAS INSTRUMENTS TLV2711IDBVR Operational Amplifier, Single, 1 Amplifier, 65kHz, 0.025V/µs, 2.7V to 10V, SOT-23, 5Pins
TI
TEXAS INSTRUMENTS TLV2711IDBVT Operational Amplifier, Single, 1 Amplifier, 65kHz, 0.025V/µs, 2.7V to 10V, SOT-23, 5Pins
TI
TEXAS INSTRUMENTS TLV2711CDBVT Operational Amplifier, Single, 1 Amplifier, 65kHz, 0.025V/µs, 2.7V to 10V, SOT-23, 5Pins
TI
OP Amp Single GP R-R O/P ±5V/10V 5Pin SOT-23 T/R
TI
Op Amp Single GP R-R O/P ±5V/10V 5Pin SOT-23 T/R
TI
Op Amp Single GP R-R O/P ±5V/10V 5Pin SOT-23 T/R
TI
OP Amp Single GP R-R O/P ±5V/10V 5Pin SOT-23 T/R
TI
Single LinCMOS(TM) Rail-To-Rail uPower Operational Amplifier
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
