| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 5 Pin |
| Supply Voltage (DC) | 16.0 V |
| Case/Package | SOT-23-5 |
| Supply Current | 625 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 5 Position |
| Power Dissipation | 0.201 W |
| Common Mode Rejection Ratio | 65 dB |
| Input Offset Drift | 2.00 µV/K |
| Bandwidth | 3 MHz |
| Slew Rate | 2.10 V/μs |
| Gain Bandwidth Product | 3 MHz |
| Thermal Shutdown | No |
| Input Offset Voltage | 500 µV |
| Input Bias Current | 1 pA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Gain Bandwidth | 3 MHz |
| Power Dissipation (Max) | 201 mW |
| Minimum CMRR Range | 65 dB |
| Supply Voltage | 2.7V ~ 16V |
| Supply Voltage (Max) | 16 V |
| Supply Voltage (Min) | 2.7 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 2.9 mm |
| Size-Width | 1.6 mm |
| Size-Height | 1.15 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The TLV271IDBVT is a 3MHz Rail-to-rail Output Operational Amplifier that takes the minimum operating supply voltage down to 2.7V over the extended industrial temperature range. This makes it an ideal alternative to the TLC271 for applications where rail-to-rail output swings are essential. The TLV271 also provides 3MHz bandwidth from only 550µA. The TLV271 is fully specified for 5 and ±5V supplies. The maximum recommended supply voltage is 16V, which allows the devices to be operated from a variety of rechargeable cells (±8V supplies down to ±1.35V). The CMOS inputs enable use in high-impedance sensor interfaces, with the lower voltage operation making an attractive alternative for the TLC271 in battery-powered applications. The 2.7V operation makes it compatible with Li-ion powered systems and the operating supply voltage range of many micropower microcontrollers available today including MSP430.
● Rail-to-rail output
● Wide bandwidth
● High slew rate
● 550µA/channel Supply current
● 39nV/√Hz Input noise voltage
● 1pA Input bias current
● Green product and no Sb/Br
TI
550uA/Ch 3MHz Rail-to-Rail Output Operational Amplifier
TI
TEXAS INSTRUMENTS TLV271IDBVR Operational Amplifier, Single, 1 Amplifier, 3MHz, 2.4V/µs, ± 1.35V to ± 8V, SOT-23, 5Pins
TI
TEXAS INSTRUMENTS TLV271CDBVR Operational Amplifier, Single, 1 Amplifier, 3MHz, 2.4V/µs, ± 1.35V to ± 8V, SOT-23, 5Pins
TI
TEXAS INSTRUMENTS TLV2711CDBVR Operational Amplifier, Single, 1 Amplifier, 65kHz, 0.025V/µs, 2.7V to 10V, SOT-23, 5Pins
TI
TEXAS INSTRUMENTS TLV271CDBVT Operational Amplifier, Single, 1 Amplifier, 3MHz, 2.4V/µs, 2.7V to 16V, SOT-23, 5Pins
TI
TEXAS INSTRUMENTS TLV2711IDBVR Operational Amplifier, Single, 1 Amplifier, 65kHz, 0.025V/µs, 2.7V to 10V, SOT-23, 5Pins
Diodes
Operational Amplifiers - Op Amps 2.7V to 16V Op Amp 0.55mA 0.5mV 1.35Vdd
TI
TEXAS INSTRUMENTS TLV2711IDBVT Operational Amplifier, Single, 1 Amplifier, 65kHz, 0.025V/µs, 2.7V to 10V, SOT-23, 5Pins
TI
TEXAS INSTRUMENTS TLV271CD Operational Amplifier, Single, 1 Amplifier, 2.4MHz, 2.4V/µs, ± 1.35V to ± 8V, SOIC, 8Pins
TI
Low Power550-uA/Ch 3MHz Rail-to-Rail Output Operational Amplifier OP Amp Single GP R-R O/P ‚±8V/16V 8Pin SOIC T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
