The TLV320AIC33 is a low power stereo audio codec with stereo headphone amplifier, as well as multiple inputs and outputs programmable in single-ended or fully differential configurations. Extensive register- based power control is included, enabling stereo 48-kHz DAC playback as low as 14 mW from a 3.3-V analog supply, making it ideal for portable battery-powered audio and telephony applications.
●The record path of the TLV320AIC33 contains integrated microphone bias, digitally controlled stereo microphone preamplifier, and automatic gain control (AGC), with mix/mux capability among the multiple analog inputs. The playback path includes mix/mux capability from the stereo DAC and selected inputs, through programmable volume controls, to the various outputs.
●The TLV320AIC33 contains four high-power output drivers as well as three fully differential output drivers. The high-power output drivers are capable of driving a variety of load configurations, including up to four channels of single-ended 16-Ω headphones using ac-coupling capacitors, or stereo 16-Ω headphones in a capacitorless output configuration. In addition, paris of drivers can be used to drive 8-Ω speakers in a BTL configuration at 500 nW per channel.
●The stereo audio DAC supports sampling rates from 8 kHz to 96 kHz and includes programmable digital filtering in the DAC path for 3D, bass, treble, midrange effects, speaker equalization, and de-emphasis for 32-kHz, 44.1-kHz, and 48-kHz rates. The stereo audio ADC supports sampling rates from 8 kHz to 96 kHz and is preceded by programmable gain amplifiers providing up to +59.5-dB analog gain for low-level microphone inputs.
●The serial control bus supports SPI or I2C protocols, while the serial audio data bus is programmable for I2S, left/right-justified, DSP, or TDM modes. A highly programmable PLL is included for flexible clock generation and support for all standard audio rates from a wide range of available MCLKs, varying from 512 kHz to 50 MHz, with special attention paid to the most popular cases of 12-MHz, 13-MHz, 16-MHz, 19.2-MHz, and 19.68-MHz system clocks.
●The TLV320AIC33 operates from an analog supply of 2.7 V-3.6 V, a digital core supply of 1.65 V-1.95 V, and a digital I/O supply of 1.1 V-3.6 V. The device is available in 5 × 5-mm, 80-ball MicroStar Junior BGA and 7 × 7-mm, 48-lead QFN.
● Stereo Audio DAC
● 100-dBA Signal-to-Noise Ratio
● 16/20/24/32-Bit Data
● Supports Rates From 8 kHz to 96 kHz
● 3D/Bass/Treble/EQ/De-emphasis Effects
● Stereo Audio ADC
● 92-dBA Signal-to-Noise Ratio
● Supports Rates From 8 kHz to 96 kHz
● Ten Audio Input Pins
● Programmable in Single-Ended or Fully Differential Configurations
● 3-State Capability for Floating Input Configurations
● Seven Audio Output Drivers
● Stereo 8-, 500-mW/Channel Speaker Drive Capability
● Stereo Fully Differential or Single-Ended Headphone Drivers
● Fully Differential Stereo Line Outputs
● Fully Differential Mono Output
● Low Power: 14-mW Stereo 48-kHz PlaybackWith 3.3-V Analog Supply
● Programmable Input/Output Analog Gains
● Automatic Gain Control (AGC) for Record
● Programmable Microphone Bias Level
● Programmable PLL for Flexible Clock Generation
● Control Bus Selectable SPI or I2C
● Audio Serial Data Bus Supports I2S, Left/Right-Justified, DSP, and TDM Modes
● Alternate Serial PCM/I2S Data Bus for Easy Connection to Bluetooth Module
● Digital Microphone Input Support
● Extensive Modular Power Control
● Power Supplies:
● Analog: 2.7 V-3.6 V.
● Digital Core: 1.65 V-1.95 V
● Digital I/O: 1.1 V-3.6 V
● Packages: 5 × 5 mm 80-VFBGA; 7 × 7 mm 48-QFN
●MicroStar Junior is a trademark of Texas Instruments.
●Bluetooth is a trademark of Bluetooth SIG, Inc.
