The TLV600x family of single-, dual-, and quad-channel operational amplifiers is specifically designed for general-purpose applications. Featuring rail-to-rail input and output (RRIO) swings, low quiescent current (75 µA, typical), wide bandwidth (1 MHz) and low noise (28 nV/√Hz at 1 kHz), this family is attractive for a variety of applications that require a good balance between cost and performance, such as consumer electronics, smoke detectors, and white goods. The low-input-bias current (±1.0 pA, typical) enables the TLV600x to be used in applications with megaohm source impedances.
●The robust design of the TLV600x provides ease-of-use to the circuit designer: unity-gain stability with capacitive loads of up to 150 pF, integrated RF/EMI rejection filter, no phase reversal in overdrive conditions, and high electrostatic discharge (ESD) protection (4-kV HBM).
●The devices are optimized for operation at voltages as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V), and are specified over the extended temperature range of –40°C to +125°C.
●The single-channel TLV6001 is available in SC70-5 and SOT23-5 packages. The dual-channel TLV6002 is offered in SOIC-8 and VSSOP-8 packages, and the quad-channel TLV6004 is offered in a TSSOP-14 package.
● Precision Amplifiers for Cost-Sensitive Systems
● Low Quiescent Current: 75 µA/ch
● Supply Range: 1.8 V to 5.5 V
● Input Voltage Noise Density: 28 nV/√Hz at 1 kHz
● Rail-to-Rail Input and Output
● Gain Bandwidth: 1 MHz
● Low Input Bias Current: 1 pA
● Low Offset Voltage: 0.75 mV
● Unity-Gain Stable
● Internal RF and EMI Filter
● Extended Temperature Range:
●–40°C to +125°C
●All trademarks are the property of their respective owners.
