| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Case/Package | VQFN-16 |
| Number of Outputs | 1 Output |
| Output Voltage | 0.8V ~ 5.5V |
| Output Current | 3 A |
| Number of Positions | 16 Position |
| Quiescent Current | 20.0 µA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 1.4 MHz |
| Topology | Buck |
| Switching Current | 4.6 A |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 2.5 V |
| Output Voltage (Max) | 5.5 V |
| Output Voltage (Min) | 0.8 V |
| Output Current (Max) | 3 A |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Input Voltage | 5.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 85℃ (TA) |
The TLV62090 device is a high frequency synchronous step-down converter optimized for small solution size, high efficiency and suitable for battery powered applications. To maximize efficiency, the converter operates in pulse width modulation (PWM) mode with a nominal switching frequency of 1.4 MHz and it automatically enters power save mode operation at light load currents. When used in distributed power supplies and point of load regulation, the device allows voltage tracking to other voltage rails and tolerates output capacitors ranging from 10 µF up to 150 µF and beyond. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation.
●The output voltage start-up ramp is controlled by the softstart pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable (EN) and power good (PG) pins. In power save mode, the device operates with typically 20-µA quiescent current. Power save mode is entered automatically and seamlessly, maintaining high efficiency over the entire load current range.
●The device is available in a 3 mm × 3 mm 16-pin VQFN (RGT) package.
TI
3A High Efficiency Step Down Converter in 3x3mm QFN Package
TI
Conv DC-DC 2.5V to 5.5V Step Down Single-Out 0.8V to 5.5V 3A 16Pin VQFN EP T/R
TI
Conv DC-DC 2.5V to 5.5V Step Down Single-Out 0.8V to 5.5V 3A 16Pin VQFN EP T/R
TI
TLV62090 DC to DC Converter and Switching Regulator Chip 0.8VDC to 2.5VDC/0.8VDC to 5.5VDC Output Evaluation Board
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
