The TMDXRM46CNCD controlCARD is a ideal product for initial software development and short run builds for system prototypes, test stands, and many other projects that require easy access to high performance controllers. The controlCARD is a complete board level module that utilize an industry standard DIMM form factor to provide a low profile single board controller solution. controlCARD use the same 100pin connector footprint to provide the analog and digital I/Os on board controller and are reasonably interchangeable. The RM46CNCD board operates from an external power supply provided via the barrel connector located on the top front of the card. The expected voltage for the control card is 6V to 30V as per the input capability of the TPS65381. The control card can be used as part of a motor control kit and offers additional control, connectivity and safety evaluation features.
● RM46L852 337 ball BGA microcontroller
● TPS65381 safety integrated power companion
● On board, isolated USB XDS100v2 JTAG emulator
● Optional path to EVM JTAG connector (via DIMM)
● Hardware option for routing N2HET timers or ePeripherals to the DIMM interface
● 10Mbps/100Mbps Ethernet interface via RJ45 with same PHY as on the TMDXRM46HDK
● Isolated UART/SCI accessible through a USB virtual port (VCP)
● LED indicators for xds100 power, activity, MCU power, GIOB7 pin activity, Ethernet link and activity
● On board power supply supporting 6V to 30V DC input and producing the 6V, 3.3V and 1.2V for the MCU
● Ignition cycle simulator switch S2 serves as system reset of TPS and MCU
