The TPA6130A2 is a stereo DirectPath™ headphone amplifier with I2C digital volume control. The TPA6130A2 has minimal quiescent current consumption, with a typical IDD of 4 mA, making it optimal for portable applications. The I2C control allows maximum flexibility with a 64 step audio taper volume control, channel independent enables and mutes, and the ability to configure the outputs into stereo, dual mono, or a single receiver speaker BTL amplifier that drives 300 mW of power into 16 Ω loads.
●The TPA6130A2 is a high fidelity amplifier with an SNR of 98 dB. A PSRR greater than 100 dB enables direct-to-battery connections without compromising the listening experience. The output noise of 9 µVrms (typical _A-weighted_) provides a minimal noise background during periods of silence. Configurable differential inputs and high CMRR allow for maximum noise rejection in the noisy environment of a mobile device.
●TPA6130A2 packaging includes a 2 by 2 mm chip-scale package, and a 4 by 4 mm QFN package.
● DirectPath™ Ground-Referenced Outputs
● Eliminates Output DC Blocking Capacitors
● Reduces Board Area
● Reduces Component Height and Cost
● Full Bass Response Without Attenuation
● Power Supply Voltage Range: 2.5 V to 5.5 V
● 64 Step Audio Taper Volume Control
● High Power Supply Rejection Ratio
●(>100 dB PSRR)
● Differential Inputs for Maximum Noise Rejection
●(68 dB CMRR)
● High-Impedance Outputs When Disabled
● Advanced Pop and Click Suppression Circuitry
● Digital I2C Bus Control
● Per Channel Mute and Enable
● Software Shutdown
● Multi-Mode Support: Stereo HP, Dual Mono
●HP, and Single-Channel BTL Operation
● Amplifier Status
● Space Saving Packages
● 20 Pin, 4 mm × 4 mm QFN
● 16 ball, 2 mm × 2 mm DSBGA
● ESD Protection of 8 kV HBM and IEC Contact
