The TPA6130A2RTJR is a 138mW DirectPath™ Stereo Headphone Amplifier with I²C digital volume control. The TPA6130A2 has minimal quiescent current consumption, with a typical IDD of 4mA making it optimal for portable applications. The I²C control allows maximum flexibility with a 64 step audio taper volume control, channel independent enables and mutes and the ability to configure the outputs into stereo, dual mono or a single receiver speaker BTL amplifier that drives 300mW of power into 16R loads. This is a high fidelity amplifier with an SNR of 98dB. A PSRR greater than 100dB enables direct-to-battery connections without compromising the listening experience. The output noise of 9µVrms (typical A-weighted) provides a minimal noise background during periods of silence. Configurable differential inputs and high CMRR allow for maximum noise rejection in the noisy environment of a mobile device.
● DirectPath™ ground-referenced outputs
● Eliminates output DC blocking capacitors
● Full bass response without attenuation
● 64 Step audio taper volume control
● High power supply rejection ratio (>100dB PSRR)
● Differential inputs for maximum noise rejection (68dB CMRR)
● High impedance outputs when disabled
● Advanced pop and click suppression circuitry
● Digital I²C bus control
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.