The TPD4S014 is a single-chip solution for USB charger port protection. This device offers low capacitance transient voltage suppressor (TVS) electrostatic discharge (ESD) clamps for the D+, D-, and standard capacitance for the ID pin. On the VBUS pin, this device provides overvoltage protection (OVP) up to 28 V DC. The overvoltage lockout feature ensures that if there is a fault condition at the VBUS line, the TPD4S014 is able to isolate the VBUS line to protect the internal circuitry from damage. There is a 17-ms turn-on delay after VBUS rises above the undervoltage lockout (UVLO) threshold in order to let the voltage stabilize before turning the nFET on. This function acts as a de-glitch and prevents unnecessary switching if there is any ringing on the line during connection.
● Input Voltage Protection at VBUS up to 28 V
● Low Ron nFET Switch
● Supports > 2 A Charging Current
● ESD Performance D+/D-/ID/VBUS Pins:
● ±15-kV Contact Discharge (IEC 61000-4-2)
● ±15-kV Air Gap Discharge (IEC 61000-4-2)
● Overvoltage and Undervoltage Lockout Features
● Low Capacitance TVS ESD Clamp for USB2.0 High Speed Data Rate
● Internal 17 ms Startup Delay
● Integrated Input Enable and Status Output Signal
● Thermal Shutdown Feature
● Space Saving SON Package (2 mm × 2 mm)
