| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 4.50V (min) |
| Case/Package | PDIP-20 |
| Number of Outputs | 8 Output |
| Output Voltage | ≤50.0 V |
| Output Current | 150 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 8 Channel |
| Number of Positions | 20 Position |
| Number of Bits | 8 Bit |
| Number of Inputs | 8 Input |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 4.5V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 4.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 24.33 mm |
| Size-Width | 6.35 mm |
| Size-Height | 4.57 mm |
| Operating Temperature | -40℃ ~ 125℃ |
If you are looking for a simple device that can store state information, look no further than Texas Instruments" TPIC6B273N flip flop device. With an open drain output, this is power management at its best. It has a single-ended output signal. This flip flop has an operating temperature range of -40 °C to 125 °C. This device comes in tube packaging. This inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V. It has 8 channels per chip.
TI
POWER LOGIC OCTAL D-TYPE LATCH
TI
Flip Flop D-Type Bus Interface Pos-Edge Open Drain 1Element 20Pin SOIC T/R
TI
TEXAS INSTRUMENTS TPIC6B273DW Latch, D Type, Non Inverted, 150ns, 500mA, DIP
TI
TEXAS INSTRUMENTS TPIC6B273N Latch, D Type, Standard, 150ns, 150mA, DIP
TI
Flip Flop D-Type Bus Interface Pos-Edge Open Drain 1Element 20Pin SOIC T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge Open Drain 1Element 20Pin SOIC Tube
National Semiconductor
Flip Flop D-Type Bus Interface Positive Edge Open Drain 1Element 20Pin PDIP
National Semiconductor
Flip Flop D-Type Bus Interface Positive Edge Open Drain 1-Element 20-Pin SOIC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
