| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 5.50V (max) |
| Case/Package | SOIC-8 |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 5.50 V |
| Output Voltage | 6.30 V |
| Number of Positions | 8 Position |
| Drain to Source Resistance (on) (Rds) | 135 mΩ |
| Polarity | N-Channel |
| Power Dissipation | 725 mW |
| Continuous Drain Current (Ids) | 500 mA |
| Rise Time | 3000 µs |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 2.7 V |
| Output Current (Max) | 500 mA |
| Fall Time | 4400 µs |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 725 mW |
| Supply Voltage | 2.7V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 2.7 V |
| Input Voltage | 5.5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Not Recommended for New Designs |
| Packaging | Tube |
| Operating Temperature | -40℃ ~ 85℃ |
The TPS2041D is a Power Distribution Switch intended for applications where heavy capacitive loads and short circuits are likely to be encountered. The TPS2041 is 135mR N-channel MOSFET high-side power switches. Each switch is controlled by a logic enable that is compatible with 5V and 3V logic. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V. When the output load exceeds the current-limit threshold or a short is present, the TPS2041 limit the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OC) logic output low. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage.
● 500mA Continuous current
● Short-circuit and thermal protection with overcurrent logic output
● 10µA Maximum standby supply current
● Logic-level enable input
● 2.5ms Typical rise time
● Undervoltage lockout
● Bidirectional switch
TI
0.7A, 2.7-5.5V Single Hi-Side MOSFET, Fault Report, Act-Low Enable
TI
USB Power SW Hi Side/DIST Single 2.7V to 5.5V 0.75A to 1.25A 5Pin SOT-23 T/R
TI
USB Power SW USB Power Switch Single 5.5V 0.75A to 1.25A 8Pin SOIC Tube
TI
USB Power SW USB Power Switch Single 5.5V 0.75A to 1.25A 8Pin SOIC T/R
TI
USB Power SW USB Power Switch Single 5.5V 0.75A to 1.25A 5Pin SOT-23 T/R
TI
USB Power SW USB Power Switch Single 5.5V 0.9A 8Pin SOIC Tube
TI
USB Power SW DIST Single 5.5V 0.85A 5Pin SOT-23 T/R
TI
USB Power SW USB Power Switch Single 5.5V 0.75A to 1.25A 8Pin HVSSOP EP T/R
TI
USB Power Switch Single 5.5V 0.75A to 1.25A 5Pin SOT-23 T/R
TI
USB Power Switch Single 5.5V 0.9A 8Pin SOIC T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
