The TPS206x power-distribution switches are intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. This device incorporates 70-mΩ N-channel MOSFET power switches for power-distribution systems that require single or dual power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V.
●When the output load exceeds the current-limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains off until valid input voltage is present. Current limit is typically 2.1 A.
● 70-mΩ High-Side MOSFET
● 1.5-A Continuous Current
● Thermal and Short-Circuit Protection
● Accurate Current Limit (1.6 A min, 2.6 A max)
● Operating Range: 2.7 V to 5.5 V
● 0.6-ms Typical Rise Time
● Undervoltage Lockout
● Deglitched Fault Report (OC)
● No OC Glitch During Power Up
● 1-µA Maximum Standby Supply Current
● Reverse Current Blocking
● TPS2060/64 Temperature Range: 0°C to 70°C
● TPS2068/69 DGN Package Temperature Range: 40°C to 85°C
● TPS2068 D Package Temperature Range:
●0°C to 70°C
● UL Listed File No. E169910
● TPS2068/69: CB Certified
● APPLICATIONS
● Heavy Capacitive Loads
● Short-Circuit Protections
