| TYPE | DESCRIPTION |
|---|
| Number of Pins | 10 Pin |
| Case/Package | VFDFN-10 |
| Number of Outputs | 1 Output |
| Output Voltage | 6.5 V |
| Output Current | 25 A |
| Power Dissipation | 2610 mW |
| Quiescent Current | 2.50 mA |
| Number of Regulated Outputs | 1 Output |
| Rise Time | 15 ns |
| Switching Frequency | 600 kHz |
| Thermal Shutdown | Yes |
| Topology | Buck |
| Duty Cycle | 90 % |
| Input Voltage (Max) | 20 V |
| Input Voltage (Min) | 3 V |
| Output Current (Max) | 25 A |
| Maximum Duty Cycle | 0.9 |
| Fall Time | 12 ns |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 2610 mW |
| Supply Voltage | 3V ~ 20V |
| Input Voltage | 3V ~ 20V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 125℃ |
The TPS40304A is a cost-optimized synchronous buck controller that operates from 3-V to 20-V input. The controller implements a voltage-mode control architecture with input-voltage feed-forward compensation that responds instantly to input voltage change. The switching frequency is fixed at 600 kHz.
●Frequency Spread Spectrum feature adds dither to the switching frequency, significantly reducing the peak EMI noise and making it much easier to comply with EMI standards.
●The TPS40304A offers design with a variety of user programmable functions, including soft-start, overcurrent protection (OCP) levels, and loop compensation.
●The OCP level is programmed by a single external resistor connected from LDRV pin to circuit ground. During initial power on, the TPS40304A enters a calibration cycle, measures the voltage at the LDRV pin, and sets an internal OCP voltage level. During operation, the programmed OCP voltage level is compared to the voltage drop across the low-side FET when it is on to determine whether there is an overcurrent condition. The TPS40304A then enters a shutdown and restart cycle until the fault is removed.
TI
3V to 20V Wide Input Synchronous Buck Controller for High Power Density 600kHz 600mV 1% Reference
TI
DC-DC Controller (External Switch) 3V to 20V Wide Input Synchronous Buck Controller for High Power Density, 600kHz, 600mV 1% Reference DC DC Cntrlr Single-OUT Sync Buck 3V to 20V Input 10Pin VSON EP T/R
TI
DC-DC Controller (External Switch) 3V to 20V Wide Input Synchronous Buck Controller for High Power Density, 600kHz, 591mV 1% Reference DC DC Cntrlr Single-OUT Sync Buck 3V to 20V Input 10Pin VSON EP T/R
TI
DC-DC Controller (External Switch) 3V to 20V Wide Input Synchronous Buck Controller for High Power Density, 600kHz, 600mV 1% Reference DC DC Cntrlr Single-OUT Sync Buck 3V to 20V Input 10Pin VSON EP T/R
TI
8-14V Vin, 1.2V Vout Synchronous Buck Converter Evaluation Module for TPS40304
TI
DC-DC Controller (External Switch) 3V to 20V Wide Input Synchronous Buck Controller for High Power Density, 600kHz, 591mV 1% Reference DC DC Cntrlr Single-OUT Sync Buck 3V to 20V Input 10Pin VSON EP T/R
TI
3V to 20V Wide Input Synchronous Buck Controller for High Power Density 600kHz 591mV 1% Reference
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
