The TPS53219EVM-690 is an evaluation module for TPS53219. The TPS53219 is a small size, single buck controller with adaptive on time D CAP mode control. It provides a fixed 1.1V output at up to 25A from a 12V input bus. The TPS53219EVM-690 also uses the 5mm x 6mm power block MOSFET for high power density and superior thermal performance. The TPS53219EVM-690 is designed to use a regulated 12V bus to produce a regulated 1.1V output at up to 25A of load current. The evaluation module is designed to demonstrate the TPS53219 in a typical low voltage application while providing test points to evaluate the performance of the TPS53219.
● 25A dc, steady state output current
● Support prebias output voltage start up
● High efficiency and high power density by using power block MOSFET
● J1 for selectable switching frequency setting
● J2 for selectable internal voltage servo soft Start
● J3 for enable function
● J6 for auto skip and forced CCM selection
● Convenient test points for probing critical waveforms
●This EVM should be operated within the input voltage range of 8V to 14V and the output voltage range of 0.3V to 1.5V. Exceeding the specified input voltage range may cause damage to the EVM.
