| TYPE | DESCRIPTION |
|---|
| Number of Outputs | 1 Output |
| Output Voltage | 0.95 V |
| Output Current | 30 A |
| Switching Frequency | 500 kHz |
| Operating Temperature (Max) | 105 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Input Voltage | 4.5V ~ 18V |
The TPS544C25EVM-681 evaluation module (EVM) is designed as a single output DC-DC converter that demonstrates a typical low-voltage application while providing a number of test points to evaluate the performance. It uses a nominal 12-V input bus to produce a regulated 0.95-V output at up to 30-A of load current, depending on the device installed.
●If a designer wants to communicate with this EVM from a Windows-based PC, a separate USB Interface Adapter EVM is required.
● The USB-TO-GPIO Adapter serves as an interface adapter or a bridge between a host PC (IBM compatible) and one or multiple slave devices via a standard type-A to mini-B USB cable. The USB-TO-GPIO Adapter is listed below in the related products section.
TI
4.5V to 18V, 30A Voltage Mode PMBus SWIFT Step-Down DC-DC Converter with FSYNC 40-LQFN-CLIP -40℃ to 125℃5
TI
Conv DC-DC 4.5V to 18V Step Down Single-Out 0.5V to 5.5V 30A 40Pin LQFN EP T/R
TI
TPS544C25 DC to DC Converter and Switching Regulator Chip 0.95VDC Output Evaluation Board
TI
4.5V to 18V, 30A Voltage Mode PMBus™ SWIFT™ Step-Down DC-DC Converter with FSYNC 40-LQFN-CLIP -40℃ to 125℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
