The TPS54540DDAR is a 4.5V to 42V input, 5A, step down DC/DC converter with Eco-mode in 8 pin HSOIC package. This step down regulator with an integrated high side MOSFET, the device survives load dump pulses up to 45V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no load supply current to 146µA. Shutdown supply current is reduced to 2µA when the enable pin is pulled low. Undervoltage lockout is internally set at 4.3V but can be increased using the enable pin. The output voltage start up ramp is internally controlled to provide a controlled start up and eliminate overshoot. A wide switching frequency range allows either efficiency or external component size to be optimized. Output current is limited cycle-by-cycle. Frequency foldback and thermal shutdown protects internal and external components during an overload condition. It is used in USB dedicated charging ports and battery.
● High efficiency at light loads with pulse skipping Eco-mode
● 100KHz to 2.5MHz fixed switching frequency
● Synchronizes to external clock
● Low dropout at light loads with integrated BOOT recharge FET
● Adjustable UVLO voltage and hysteresis
● 0.8V 1% internal voltage reference
● Supported by WEBENCH software tool
●ESD sensitive device, take proper precaution while handling the device.