| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 10 Pin |
| Case/Package | VSSOP-10 |
| Number of Outputs | 1 Output |
| Output Voltage | 0.8V ~ 3.3V |
| Output Current | 250 mA |
| Power Dissipation | 0.555 W |
| Quiescent Current | 40.0 µA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 800 kHz |
| Topology | Buck |
| Input Voltage (Max) | 6.5 V |
| Input Voltage (Min) | 1.8 V |
| Output Voltage (Max) | 3.3 V |
| Output Voltage (Min) | 0.8 V |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 555 mW |
| Input Voltage | 1.8V ~ 6.5V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Operating Temperature | -40℃ ~ 125℃ (TJ) |
Never worry about components not turning on from improper voltage by using this TPS60500DGSG4 charge pump voltage doubler from Texas Instruments. With an output that has a voltage of 0.8 to 3.3 V, this is power management at its best. Its output produces a current of 250(Max) mA. In order to ensure parts aren"t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This device has a minimum operating supply voltage of 1.8 V and a maximum of 6.5 V. This inverting charge pump has an operating temperature range of -40 °C to 85 °C.
TI
250mA Adjustable (0.8V-3.3V) High-Efficiency Step-Down Charge Pump
TI
TEXAS INSTRUMENTS TPS60500DGSR DC-DC Adjustable Charge Pump Voltage Converter, 1.8V to 6.5V in, 0.8V to 3.3V/250mA out, VSSOP-10
TI
TEXAS INSTRUMENTS TPS60500DGS DC-DC Adjustable Charge Pump Voltage Converter, 1.8V to 6.5V in, 0.8V to 3.3V/250mA out, VSSOP-10
TI
Evaluation Board, Step Down Charge Pump Regulator, Input Voltage 2.5V-6.5V
TI
Charge Pump STPDN 0.8V to 3.3V 250mA 10Pin VSSOP Tube
TI
Charge Pump STPDN 0.8V to 3.3V 250mA 10Pin VSSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
