| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Case/Package | QFN-16 |
| Number of Outputs | 1 Output |
| Output Voltage | 1.8V ~ 5.5V |
| Output Current | 4 A |
| Number of Positions | 16 Position |
| Quiescent Current | 20.0 µA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 600 kHz |
| Topology | Boost |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 1.8 V |
| Output Voltage (Max) | 5.5 V |
| Output Voltage (Min) | 1.8 V |
| Output Current (Max) | 1 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Input Voltage | 1.8V ~ 5.5V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 4 mm |
| Size-Width | 4 mm |
| Size-Height | 0.9 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The TPS61030RSAR is a synchronous Boost Converter with 4A switch. The TPS6103x device provides a power supply solution for products powered by either one-cell Li-ion or Li-polymer or a two to three-cell alkaline, NiCd or NiMH battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output current up to 1A at 5V at a supply voltage down to 1.8V. The implemented boost converter is based on a fixed frequency, pulse-width- modulation (PWM) controller using a synchronous rectifier to obtain maximum efficiency. At low load currents the converter enters power save mode to maintain a high efficiency over a wide load current range. The power save mode can be disabled, forcing the converter to operate at a fixed switching frequency. It can also operate synchronized to an external clock signal that is applied to the SYNC pin.
● Power save mode for improved efficiency at low output power
● Low battery comparator
● Low EMI-converter (integrated anti-ringing switch)
● Load disconnect during shutdown
● Over-temperature protection
● Fixed and adjustable output voltage options up to 5.5V
● 96% Efficiency
● 20µA Typical device quiescent current
● Green product and no Sb/Br
TI
Adjustable 4A Switch 96% Efficient Boost Converter w/20µA Iq in TSSOP-16
TI
Step-Up Regulator Adjustable, 4A Switch, 96% Efficient Boost Converter w/20µA Iq in TSSOP-16 Conv DC-DC 1.8V to 5.5V Step Up Single-Out 1.8V to 5.5V 1A 16Pin HTSSOP EP T/R
TI
Step-Up Regulator Adjustable, 4A Switch, 96% Efficient Boost Converter w/20µA Iq in TSSOP-16 Conv DC-DC 1.8V to 5.5V Step Up Single-Out 1.8V to 5.5V 1A 16Pin VQFN EP T/R
TI
Step-Up Regulator Adjustable, 4A Switch, 96% Efficient Boost Converter w/20µA Iq in TSSOP-16 Conv DC-DC 1.8V to 5.5V Step Up Single-Out 1.8V to 5.5V 1A 16Pin HTSSOP EP Tube
TI
Adjustable, 4A Switch, 96% Efficient Boost Converter w/20μA Iq in TSSOP-16 16-HTSSOP -40℃ to 85℃
TI
Adjustable, 4A Switch, 96% Efficient Boost Converter w/20μA Iq in TSSOP-16 16-QFN -40℃ to 85℃
TI
TEXAS INSTRUMENTS TPS61030EVM-208 Evaluation Module for Adjustable, 4A Switch, 96% Efficient Boost Converter
TI
Evaluation Module for 96% Efficient Synchronous Boost Converter With 4A Switch, 5.5V Vout
TI
Adjustable, 4A Switch, 96% Efficient Boost Converter w/20μA Iq in TSSOP-16 16-HTSSOP -40℃ to 85℃
National Semiconductor
Con Volt DC-DC Single Output Step Up 16-Pin HTSSOP EP Tube
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
