The TPS61032EVM-208 is an evaluation module for the TPS61032 inductive boost converter in a TSSOP 16 package that can supply voltages up to 5.5V from input voltages in the range of 1.8V to 5.5V. For proper operation the maximum input voltage should not exceed the output voltage. The maximum output current is at least 1000mA, depending on the input voltage. The evaluation module also supports for the TPS6103x device family. The TPS6103x devices provide a power supply solution for products powered by either a one cell Li-Ion or Li polymer, or a two to three cell alkaline, NiCd or NiMH battery. The converter can be disabled to minimize battery drain. During shutdown, the load is completely disconnected from the battery. A low EMI mode is implemented to reduce ringing and, in effect, lower radiated electromagnetic energy when the converter enters the discontinuous conduction mode.
● 96% efficient synchronous boost converter with 1000mA output current from 1.8V input
● Input voltage range 1.8V to 5.5V
● Fixed and adjustable output voltage options Up to 5.5V
● Power save mode for improved efficiency at Low output Power
● Low battery comparator
● Low EMI converter (Integrated antiringing switch)
● Load disconnect during shutdown
● Over temperature protection
●This EVM should be operated within the input voltage range of 1.8V to 5V and the output voltage range of 2.5V to 5.5V. Exceeding the specified input range may cause damage to the EVM.
