TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 20 Pin |
Case/Package | VQFN-20 |
Number of Outputs | 1 Output |
Output Voltage | 4.5V ~ 12.6V |
Output Current | 10 A |
Quiescent Current | 110 µA |
Number of Regulated Outputs | 1 Output |
Switching Frequency | 200kHz ~ 2.2MHz |
Topology | Boost |
Switching Current | 10 A |
Input Voltage (Max) | 12 V |
Input Voltage (Min) | 2.7 V |
Output Voltage (Max) | 12.6 V |
Output Voltage (Min) | 4.5 V |
Output Current (Max) | 10 A |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
Input Voltage | 12 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Operating Temperature | -40℃ ~ 85℃ (TA) |
The TPS61088 is a high power density, fully integrated synchronous boost converter with a 11-mΩ power switch and a 13-mΩ rectifier switch to provide a high efficiency and small size solution in portable systems. The TPS61088 has wide input voltage range from 2.7 V to 12 V to support applications with single cell or two cell Lithium batteries. The device has 10-A switch current capability and is capable of providing an output voltage up to 12.6 V.
●The TPS61088 uses adaptive constant off-time peak current control topology to regulate the output voltage. In moderate to heavy load condition, the TPS61088 works in the pulse width modulation (PWM) mode. In light load condition, the device has two operation modes selected by the MODE pin. One is the pulse frequency modulation (PFM) mode to improve the efficiency and another one is the forced PWM mode to avoid application problems caused by low switching frequency. The switching frequency in the PWM mode is adjustable ranging from 200 kHz to 2.2 MHz by an external resistor. The TPS61088 also implements a programmable soft-start function and an adjustable switching peak current limit function. In addition, the device provides 13.2-V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.
●The TPS61088 is available in a 4.50-mm × 3.50-mm 20-pin VQFN package.
TI
Conv DC-DC 2.7V to 12V Step Up Single-Out 4.5V to 12.6V 20Pin VQFN EP T/R
TI
Conv DC-DC 2.7V to 12V Step Up Single-Out 4.5V to 12.6V 20Pin VQFN EP T/R
TI
TPS61088 DC to DC Converter and Switching Regulator Chip 8.7VDC to 9.3VDC Output Evaluation Board
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.