| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 1.2 MHz |
| Number of Pins | 5 Pin |
| Case/Package | SC-70-5 |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 3.6 V |
| Output Voltage | 38 V |
| Output Current | 400 mA |
| Number of Channels | 1 Channel |
| Number of Positions | 5 Position |
| Switching Frequency | 1.2 MHz |
| Topology | Boost |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 2.7 V |
| Input Voltage (DC Max) | 5.5 V |
| Input Voltage (DC Min) | 2.7 v |
| Output Voltage (Max) | 38 V |
| Output Voltage (Min) | 2.7 V |
| Output Current (Max) | 400 mA |
| Output Current (Min) | 1.2 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Size-Length | 2 mm |
| Size-Width | 1.25 mm |
| Size-Height | 1.1 mm |
| Operating Temperature | -40℃ ~ 125℃ (TJ) |
With a 40-V rated integrated switch FET, the TPS61169 is a boost converter that drives LEDs in series. The boost converter has a 40-V, 1.8-A internal MOSFET with minimum 1.2-A current limit; thus it can drive single or parallel LED strings for small- to large-size panel backlighting. The default white LED current is set with the external sensor resistor, RSET, and the feedback voltage is regulated to 204 mV, as shown in the . During the operation, the LED current can be controlled by using a pulse width modulation (PWM) signal applied to the CTRL pin, through which the duty cycle determines the feedback reference voltage. The TPS61169 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61169 to prevent the output voltage from exceeding the absolute maximum voltage ratings of the device during open LED conditions.
●The TPS61169 is available in a space-saving 5-pin SC70 package.
TI
TPS61169 38V High-Current Boost WLED Driver 5-SC70 -40℃ to 85℃
TI
TEXAS INSTRUMENTS TPS61169DCKR LED Driver, Boost (Step Up), 2.7V to 5.5V input, 1.2MHz Switch. Frequency, 38V/400mA out, SC-70-5
TI
WLED Driver Evaluation Board
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
