TPS62110HPWP Datasheet PDF - TI

The TPS62110HPWP is a low-noise synchronous step-down DC-to-DC Converter ideally suited for systems powered from a 2-cell Li-ion battery or from a 12 or 15V rail. The TPS62110 is a synchronous PWM converter with integrated N-channel and P-channel power MOSFET switches. Synchronous rectification is used to increase efficiency and to reduce external component count. To achieve highest efficiency over a wide load current range, the converter enters a power-saving, pulse-frequency modulation (PFM) mode at light load currents. Operating frequency is typically 1MHz, allowing the use of small inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 0.8 to 1.4MHz. For low noise operation, the converter can be operated in PWM-only mode. In the shutdown mode, the current consumption is reduced to less than 2µA.

● Up to 1.4MHz synchronizable to external clock signal

● High efficiency over a wide load current range due to PFM/PWM operation mode

● 100% Maximum duty cycle for lowest dropout

● Over-temperature and overcurrent protection

● Up to 95% efficiency

● 32µA Typical quiescent current

● Green product and no Sb/Br