| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Case/Package | QFN-16 |
| Number of Outputs | 1 Output |
| Output Voltage | 3.3 V |
| Output Current | 2 A |
| Number of Positions | 16 Position |
| Quiescent Current | 17.0 µA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 2.5 MHz |
| Topology | Buck |
| Input Voltage (Max) | 17 V |
| Input Voltage (Min) | 3 V |
| Output Voltage (Max) | 6 V |
| Output Voltage (Min) | 3.3 V |
| Output Current (Max) | 2 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 3 V |
| Input Voltage | 3V ~ 17V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
| Size-Length | 3.15 mm |
| Size-Width | 3.15 mm |
| Size-Height | 0.95 mm |
| Operating Temperature | -40℃ ~ 85℃ (TA) |
The TPS62142RGTT is a synchronous Step-down DC-to-DC Converter optimized for applications with high power density. A high switching frequency of typically 2.5MHz allows the use of small inductors and provides fast transient response by use of the DCS-Control™ topology. With their wide operating input voltage range of 3 to 17V, it is ideally suited for systems powered from either a Li-ion or other batteries, as well as from 12V intermediate power rails. It supports up to 2A of continuous output current at output voltages between 0.9 and 6V (with 100% duty-cycle mode). The output voltage start-up ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable (EN) and open-drain power good (PG) pins. In power save mode, the device draws quiescent current of about 17µA from VIN.
● Pin-selectable output voltage (nominal 5%)
● Programmable soft-start and tracking
● Seamless power-save mode transition
● Selectable operating frequency
● Power-good output
● Short-circuit protection
● Over temperature protection
● 100% Duty-cycle mode
● Green product and no Sb/Br
TI
3V to 17V 2A Step-Down Converter in 3x3 QFN Package
TI
Conv DC-DC 3V to 17V Synchronous Step Down Single-Out 3.3V 2A 16Pin VQFN EP T/R
TI
Conv DC-DC 3V to 17V Synchronous Step Down Single-Out 3.3V 2A 16Pin VQFN EP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
