| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 10 Pin |
| Supply Voltage (DC) | 5.50V (max) |
| Case/Package | VFDFN-10 |
| Number of Outputs | 1 Output |
| Output Voltage | 1.2V ~ 5.5V |
| Output Current | 1.8 A |
| Number of Positions | 10 Position |
| Quiescent Current | 40.0 µA |
| Number of Regulated Outputs | 1 Output |
| Switching Frequency | 1.25MHz ~ 1.5MHz |
| Input Voltage (Max) | 5.5 V |
| Input Voltage (Min) | 1.8 V |
| Output Voltage (Max) | 5.5 V |
| Output Voltage (Min) | 1.2 V |
| Output Current (Max) | 1.2 A |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 1.8 V |
| Input Voltage | 1.8V ~ 5.5V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR) |
| Operating Temperature | -40℃ ~ 85℃ (TA) |
The TPS6300x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1800 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
●The TPS6300x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package (QFN) measuring 3 mm × 3 mm (DRC).
TI
96% Buck-Boost Converter with 1.8A Current Switches in 3x3 QFN
TI
Buck-Boost Regulator 96% Buck-Boost Converter with 1.8A Current Switches in 3x3 QFN Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 1.2V to 5.5V 1.2A 10Pin VSON EP T/R
TI
Buck-Boost Regulator 96% Buck-Boost Converter with 1.8A Current Switches in 3x3 QFN Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 1.2V to 5.5V 1.2A 10Pin VSON EP T/R
TI
Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 1.2V to 5.5V 1.2A Automotive 10Pin VSON EP T/R
TI
TEXAS INSTRUMENTS TPS63000EVM-148 Evaluation Module for 96% Buck Boost Converter with 1.8A Current Switches
TI
Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 1.2V to 5.5V 1.2A 10Pin VSON EP T/R
TI
Conv DC-DC 1.8V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 1.2V to 5.5V 1.2A 10Pin VSON EP T/R
TI
Automotive Catalog 96% Buck-Boost Converter with 1.8A Current Switches in 3x3 QFN 10-VSON -40℃ to 85℃
TI
HIGH EFFICIENT SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 1.8A SWITCHES
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
